| Brand | ROCKWILL |
| Model NO. | Amorphous Alloy Dry - type Transformer |
| Rated voltage | 10kV |
| Rated frequency | 50/60Hz |
| Rated capacity | 630kVA |
| Series | SCBH |
Product Introduction
The SCBH15 amorphous alloy dry-type transformer is an efficient, energy-saving and environmentally friendly transformer. It adopts amorphous alloy core material and features low loss, low noise and high short-circuit resistance. Its no-load loss is significantly lower than that of traditional silicon steel sheet transformers, which can effectively reduce energy waste. It is suitable for places with high requirements for low-carbon environmental protection, such as urban distribution networks, industrial parks and new energy application scenarios. This transformer does not require insulating oil, has excellent fire resistance, is safe and reliable to use, and has low maintenance costs, making it an ideal choice for achieving green power development.
Scope of Application
The SCBH15 amorphous alloy dry-type transformer is widely applicable to fields with high requirements for energy conservation and environmental protection, such as urban power grids, industrial parks, commercial complexes, residential communities, hospitals, schools, airports and other public facilities. In addition, it also has important application value in new energy fields, such as photovoltaic power generation, wind power generation and distributed energy systems.
Product Description
Core Material: Adopts an amorphous alloy core with ultra-low loss characteristics. Compared with traditional silicon steel sheets, it can effectively reduce no-load loss and operating costs.
Structural Design: Dry-type structure, no need for transformer oil, eliminating the risk of oil leakage. It has excellent fire resistance, is safe and reliable, and is suitable for indoor use and densely populated areas.
Operational Performance: Features low noise and low temperature rise design, which can maintain stable performance during long-term high-load operation and extend the service life of the equipment.
Applicable Scenarios: Suitable for various occasions such as urban power grids, industrial parks, commercial complexes, schools, hospitals, airports, photovoltaic and wind power generation.
Main parameters
Rated capacity range |
30kVA ~ 2500kVA |
Primary voltage |
10kV, 6kV or 35kV |
Secondary voltage |
0.4kV or other voltage ratings |
Frequency |
50Hz or 60Hz |
Connect groups |
Dyn11 or Yyn0 |
Executive Standards
GB/T 10228 - 2015 |
Dry - type power transformer technical parameters and requirements |
IEC 60076 |
Power transformers |
IEC 60726 |
Dry - type transformers |
GB/T 4208 - 2017 |
Enclosure protection level (IP code) |
GB/T 17626.5 - 2008 |
EMC test and measurement technology |
-
Design Solution of 24kV Dry Air Insulated Ring Main UnitThe combination of Solid Insulation Assist + Dry Air Insulation represents the development direction for 24kV RMUs. By balancing insulation requirements with compactness and employing solid auxiliary insulation, insulation tests can be passed without significantly increasing phase-to-phase and phase-to-ground dimensions. Encapsulating the pole column solidifies the insulation for the vacuum interrupter and its connecting conductors.Maintaining the 24kV outgoing busbar phase spacing at 110mm,Rockwill16/08-2025 -
Optimization Design Scheme for the 12kV Air-Insulated Ring Main Unit Isolating Gap to Reduce Breakdown Discharge ProbabilityWith the rapid development of the power industry, the ecological concept of low-carbon, energy-saving, and environmental protection has been deeply integrated into the design and manufacturing of power supply and distribution electrical products. The Ring Main Unit (RMU) is a key electrical device in distribution networks. Safety, environmental protection, operational reliability, energy efficiency, and economy are inevitable trends in its development. Traditional RMUs are primarily representedRockwill16/08-2025 -
Analysis of Common Problems in 10kV Gas-Insulated Ring Main Units (RMUs)Introduction:10kV gas-insulated RMUs are widely used due to their numerous advantages, such as being fully enclosed, possessing high insulation performance, requiring no maintenance, having a compact size, and offering flexible and convenient installation. At this stage, they have gradually become a critical node in urban distribution network ring-main power supply and play a significant role in the power distribution system. Problems within gas-insulated RMUs can severely impact the entire diRockwill16/08-2025 -
SF₆-Free Solution for Air-Insulated/Eco-friendly Gas Ring Main UnitsⅠ. Technical Bottlenecks of SF₆ SubstitutionInsulation Medium Performance Gapo Dried Air/N₂ insulation strength is only 1/3 of SF₆, requiring expansion of contact gap from 60mm to ≥150mm.o Conventional spring mechanisms lack energy to drive rapid closure of large gaps, easily causing contact ablation due to pre-strike.o Synthetic gases (e.g., C4+CO₂) decompose under arcing, leading to irreversible insulation degradation.Mechanical Structural Limitationso National Grid standardization fixRockwill16/08-2025 -
Implementation Scheme for Installing Lightning Arresters or Voltage Transformers in Gas-Insulated Ring Main UnitsAccording to insulation type, ring main units (RMUs) can be categorized as gas-insulated or air-insulated. The former installs primary circuit components in a sealed metal enclosure filled with low-pressure gas (primarily SF₆ or mixed gases) as the insulating medium, using cable terminals for incoming and outgoing lines. Due to superior insulation, compact size, and modular design, they are widely used in 10kV outdoor distribution substations and prefabricated transformer stations. However, theiRockwill16/08-2025 -
Pressure Relief Safety Solution for Gas-Insulated Ring Main UnitsⅠ. Problem ContextAs a core component in urban power distribution networks, ring main units (RMUs) are widely used in residential areas, factories, and public buildings due to their compact structure, low cost, and high reliability. However, internal equipment failures or arc faults may generate high-temperature, high-pressure gas, leading to cabinet explosions that endanger personnel and equipment. While traditional sealed designs maintain insulation integrity, they fail to rapidly release sudRockwill16/08-2025
