占位边距
Explore Rockwill’s project highlights across smart grids, EV charging networks, and power distribution. See how our reclosers, switchgear, transformers, and prefabricated substations deliver reliable performance worldwide.

84 Units 33kV Outdoor SF6 Load Break Switches for Tanzania White City Power Project


84 Units 33kV Outdoor SF6 Load Break Switches for Tanzania White City Power Project

Rockwill has successfully delivered 84 units of 33kV outdoor SF6 load break disconnectors. The equipment has been officially commissioned and connected to the grid for operation in the White City Power Project of Tanzania REA Phase II, empowering the upgrading and improvement of rural power grids in Tanzania.

01 General Overview: Tanzania White City 33 kV Grid Upgrade Project

1.1 Project Background

The Phase II project (REA II) of the Tanzania Rural Energy Agency (REA) is one of the largest rural electrification initiatives in East Africa. It aims to improve electricity coverage and stability in remote areas by upgrading the 33 kV distribution network. The distribution lines in White City span a typical tropical savanna climate zone, facing challenges such as extreme high temperatures (exceeding 45°C), intense UV radiation, humidity fluctuations during alternating dry and wet seasons, and high dust environments.

To address these challenges, Rockwill delivered 84 units of 33 kV outdoor SF6 gas-insulated load break switches (LBS). These devices are integrated with motorized operating mechanisms and SCADA monitoring systems. Through line segmentation, isolation, and automated dispatching, they effectively resolve the long-term power outage issues caused by manual fault patrolling on long-distance distribution lines.

1.2 Technical Specifications

The equipment used in this project adheres to strict international standards for electrical performance and environmental resistance:

Parameter Specification
Equipment Type Outdoor SF6 Insulated Load Break Switch (LBS)
Rated Voltage 33 kV
Rated Continuous Current 630 A
Rated Frequency 50/60 Hz
Short Time Withstand Current 20 kA / 3s
Rated Short-circuit Making Current 50 kA (Peak)
Mechanical Operations 10,000 times (Guaranteed)
Mechanism Type Motorized with backup manual handle
Compliance Standards IEC 62271-103, IEC 62271-1:2017

1.3 Core Value

The project solution implements a "segmentation + automated operation" logic to achieve an intelligent upgrade of the Tanzania REA II lines:

  • Line Segmentation: 84 nodes provide fine-grained segmentation on long-distance lines, minimizing the scope of power outages.
  • Flexible Load Switching: Supports frequent switching under a 630 A rated current, facilitating grid interconnection and capacity expansion.
  • Fault Current Handling: 50 kA short-circuit making capability ensures perfect coordination with upstream protection devices.

02 Manufacturing Quality: Reliability for Tropical Environments

2.1 SF6 Gas Insulation Technology

To counter the risks of high dust and humidity in the tropical savanna climate, Rockwill utilizes a fully sealed stainless steel enclosure. SF6 gas, as the insulation and arc-extinguishing medium, provides excellent dielectric properties, reducing the equipment volume by 40% compared to air-insulated alternatives. The internal contacts are completely shielded from external salt spray and moisture corrosion.

2.2 Motorized & SCADA Ready

  • Intelligent Upgrade: Each unit is equipped with a high-reliability motorized mechanism, supporting remote signal triggering with millisecond-level response times.
  • Real-time Monitoring: Reserved SCADA communication interfaces allow the dispatch center to obtain real-time load status, SF6 pressure alarms, and switch position signals, moving away from passive "manual patrol" maintenance modes.

2.3 Superior Corrosion & UV Protection

  • Enclosure Material: Made of 304/316L grade stainless steel with a specialized powder coating process, ensuring corrosion resistance far exceeding conventional outdoor switches.
  • Seal Optimization: Designed for Africa's intense UV environment, all external seals are made of high-performance silicone rubber and UV-resistant materials, ensuring no cracking or leakage throughout the 30-year lifecycle.

84 Units 33kV Outdoor SF6 Load Break Switches for Tanzania White City Power Project

03 Rigorous Testing: Compliance with International Standards

Rockwill maintains "engineering-grade" quality control. Before delivery, all 84 units passed comprehensive type tests in authoritative third-party laboratories:

  • Insulation Test: Verified power frequency and lightning impulse withstand levels under simulated high-temperature and high-humidity conditions.
  • Temperature Rise Test: Ensured that winding temperature rise remains within standards under a 45°C ambient temperature and 630 A full-load operation.
  • Short-time Withstand & Peak Current Test: Verified mechanical stability under 20 kA / 3s and 50 kA peak conditions.

Routine Factory Tests:

  • SF6 Leakage Detection: High-precision helium mass spectrometer leak detectors ensure an annual leakage rate of less than 0.1%.
  • Mechanical Operation Alignment: 100% execution of 50 consecutive motorized operations to verify mechanism reliability.
  • Contact Resistance Measurement: Strict control of contact resistance to reduce operational losses.

84 Units 33kV Outdoor SF6 Load Break Switches for Tanzania White City Power Project

04 Logistics & Delivery: Secure Cross-regional Transport

4.1 Professional Packing

For long-distance inland transport in Tanzania, the equipment is packed in heavy-duty fumigated wooden cases, equipped with internal shock absorbers and vacuum plastic sealing to protect precision motorized mechanisms from damage during bumpy transport.

4.2 Timely Delivery

Rockwill's overseas project support team ensured that the 84 units were delivered to the White City site in batches, effectively safeguarding the overall progress of the REA II project.

84 Units 33kV Outdoor SF6 Load Break Switches for Tanzania White City Power Project

05 Site Performance & Lifecycle Value

5.1 Installation Performance

Thanks to the highly integrated pole-mounted design, the site construction team achieved "plug-and-play" installation. Standardized terminals and clear control cabinet interfaces significantly shortened the on-site commissioning cycle.

84 Units 33kV Outdoor SF6 Load Break Switches for Tanzania White City Power Project

5.2 Summary

The successful commissioning of the Tanzania White City project demonstrates the superior reliability of Rockwill SF6 load break switches in harsh tropical environments. Through SCADA integration, the average fault recovery time in the region has been reduced by approximately 50%, providing a successful model for the intelligent transformation of East African power grids.

Deployed Equipment

  • Outdoor Air Load Break Switch for Distribution Networks-12kV to 40.5kV
    As a China manufacturer supporting OEM/ODM, Rockwill FKW18 series outdoor AC medium voltage load break switch complies with GB/T 3804-2017 and IEC 62271-103 . Designed for 12kV to 40.5kV three-phase power distribution systems. Composed of disconnect blade, arc extinguishing chamber, and operating mechanism, it features simple structure, reliable arc extinguishing performance, and stable operation. Suitable for pole-mounted and ground-mounted installation in urban and rural distribution networks.
  • Pole Mounted Outdoor SF6 Load Break Switch 15kV
    As a professional China Manufacturer, we support OEM/ODM customization for operating type, communication protocol, marking, bushings and secondary monitoring functions.The RPS-15 15kV pole-mounted SF6 gas-insulated load break switch is KEMA type tested and fully compliant with IEC 62271-103:2021 and IEC 62271-1:2017+AMD1:2021. Developed for overhead pole installation, it offers multiple configurable versions: manual, motorized, remote control and automatic sectionalizer. It delivers safe, low-ma
  • Outdoor Pole-Mounted SF6 load break switch 40.5kV
    The RPS series outdoor pole-mounted SF6 load break switch is a fully gas-insulated AC high-voltage switching device specially developed for 40.5kV overhead power distribution networks. Rated at 630A, 50/60Hz, this product strictly complies with IEC and ANSI international standards, integrating compact mechanical design, superior insulation performance, intelligent secondary monitoring system and flexible customized manufacturing capability. It is applicable to pole-mounted outdoor deployment as
  • High-performance Indoor SF6 Load Break Switch 12kV 24kV
    The RLS Series High-Performance Indoor SF6 Load Break Switch is a compact, three-position medium-voltage switching device engineered for 12kV and 24kV power distribution networks. This unit utilizes SF6 gas as both the primary insulating and arc-extinguishing medium.Encased in a robust epoxy resin tank, the switch integrates Closing (On), Opening (Off), and Earthing (Ground) functions into a single sealed module. This design ensures superior dielectric strength, rapid arc suppression, and "maint
  • Reliable SF6 Load Break Switch for Power Grids 24kV
    This SF6 load break switch, an switchgear with the rated voltage of 12kV/24kV/36kV, adopted with SF6 gas as an arc-extinguishing and insulation medium, including the three contactors for switching-on and switching-off and to ground, and is characteistic in its small volume, its convenient for installation and operation and its the great adaptability with surroundings.The SF6 load break switch and RLS-24D of SF6 load switch plus fuse combination can function to protect and control the electric eq
  • Compact Indoor SF6 Load Break Switch 12kV
    Rockwill RLS-12 indoor SF6 load break switch is a compact gas-insulated primary device developed for 12 kV indoor medium-voltage distribution systems. It adopts SF6 gas as both insulating and arc-extinguishing medium, equipped with standard three-position contact structure to realize Close, Open and Earthing functions.With small overall dimensions, lightweight structure, simple installation and stable performance, the product boasts outstanding environmental adaptability. It undertakes control a
  • China Indoor SF6 Load Break Switch Manufacturer 36kV
    RLS series indoor high-voltage SF6 load break switch is the core matching component for 36 kV medium-voltage switchgear. SF6 gas acts as both arc-extinguishing and insulating medium. It adopts a standard three-position contact structure to realize Close, Open and Earth functions.With compact overall dimensions, simple installation and operation, the product features strong environmental adaptability. Two types are available: standalone RLS load break switch and RLS switch-fuse combination unit.
  • RPS SF6-insulated pole-mounted load break switch manufacturer
    The RPS-38 is a 38kV-class SF6-insulated pole-mounted load break switch (switch-disconnector) designed for distribution automation systems. KEMA type-tested with a 3mm stainless steel sealed tank, it delivers maintenance-free operation across extreme environments (-45°C to +85°C). Available in manual, motorized, remote-controlled, and automatic sectionalizer configurations.SF6-Insulated Load Break Switch Finished Product Showcase VideoKey FeaturesConstruction: 3mm stainless steel tank with minim

Related Solutions

Leave your contact information to receive the full technical white paper, equipment list, and energy efficiency report for this case. Request Reference Materials
Recent Success Reference
Send inquiry
+86
Click to upload file
Download
Experts Electrical is dedicated to serving the personnel in the global power industry.
Join Experts Electrical, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!
App Store
Download
Get the IEE Business Application
Use the IEE-Business app to find equipment, obtain solutions, connect with experts, and participate in industry collaboration anytime, anywhere—fully supporting the development of your power projects and business.
Message
Inquiry
Email
E-mail
WhatsApp
WhatsApp
Chat
Chen/CEO