占位边距

Overhead Line Single Phase Automatic Step Voltage Regulator 6kV-34.5kV

  • Overhead Line Single Phase Automatic Step Voltage Regulator 6kV-34.5kV

Key attributes

Brand ROCKWILL
Model NO. Overhead Line Single Phase Automatic Step Voltage Regulator 6kV-34.5kV
Rated voltage 33kV
Phases Single-phase
Series RVR

Description

Manufactured by Rockwill, a leading China Manufacturer, this single-phase automatic step voltage regulator is an oil-immersed tap-changing autotransformer designed for overhead medium-voltage distribution lines.

Equipped with an advanced digital controller and a motor-driven on-load tap changer (OLTC), it continuously samples voltage and current signals from the grid and automatically adjusts the output voltage in discrete steps to compensate for line voltage drop, load fluctuations, and source-side instability.

Fully compliant with IEEE C57.12 standards, the oil-immersed regulator covers a ±10% boost and buck range across 32 steps (approximately 0.625% per step), and is rated for system voltages from 2,400 V (60 kV BIL) to 34,500 V (200 kV BIL), compatible with both 50 Hz and 60 Hz networks.

Single‑Phase Automatic Step Voltage Regulator Outline Drawing

Overhead Line Single Phase Automatic Step Voltage Regulator Outline Drawing

Product Showcase Video

Key Features

  • Precise step voltage regulation :32-step on-load tap changer provides fine adjustment within a ±10 % range, maintaining stable output voltage under dynamic load conditions

  • Real-time adaptive control: Microprocessor-based controller samples line voltage and current via internal potential and current transformers, automatically selecting the appropriate tap position

  • Oil-immersed construction:Mineral oil insulation and sealed tank design ensure reliable outdoor operation with minimal maintenance

  • Motor-driven on-load tap changer :Arc-suppression tap-changer mechanism allows tap transitions under load without service interruption, with a mechanical life exceeding one million operations

  • Integrated protection;Built-in lockout functions for line fault, overload, overcurrent, and undervoltage conditions

  • Remote monitoring capability : Optional GPRS / GSM / Bluetooth connectivity for remote control and SCADA integration

  • Flexible installation: Suitable for pole-mount, pad-mount, and substation deployment

SEL‑2431 Controller Front‑Panel Features – Physical Photo

Overhead Line Single Phase Automatic Step Voltage Regulator 6kV-34.5kV

Technical Parameters

Voltage

(kV)

Current

(A)

Capacity

(kVA)

BIL (kV)

Power Frequency Withstand Voltage (kV)

Insulation Class

6/6.35

50

30/32

75/95

28

A

100

60/64

150

90/95

200

120/127

300

180/191

400

240/254

500

300/318

600

360/381

11

50

55

100

110

150

165

200

220

300

330

400

440

500

550

600

660

15

50

75

125/150

50

100

150

150

225

200

300

300

450

400

600

500

750

22

50

110

100

220

150

330

200

440

300

660

33

50

165

170/200

70

100

330

150

495

200

660

250

825

300

990

 

Voltage

(kV)

Current

(A)

Capacity

(kVA)

BIL (kV)

Power Frequency Withstand Voltage (kV)

Insulation Class

7.62

50

38

60/75

20

A

100

76

150

114

219

167

328

250

438

333

546

416

13.8

50

69

95/125

38

100

138

150

207

200

276

300

414

400

552

14.4

50

72

100

144

200

288

300

432

400

576

19.92

50

100 

170/200

70

100

200

167

333

200

400

335

667

34.5

50

165

100

330

150

495

200

660

Wiring Examples

The RVR-1 single-phase oil-immersed automatic voltage regulator offers four basic wiring configurations for applying single-phase regulators in single-phase and three-phase systems. Voltage regulation is realized by the single-phase regulators.Three single-phase regulators connected in star a triphasic line with grounded neutral providing the system with 10% of the regulation range

Overhead Line Single Phase Automatic Step Voltage Regulator 6kV-34.5kV

Single Phase Automatic Voltage Regulator Actual Operation Diagram

Overhead Line Single Phase Automatic Step Voltage Regulator Operation Diagram

Operating Conditions

Parameter Specification
Ambient temperature –40 °C to +55 °C
Altitude ≤ 1,000 m above sea level
Installation Outdoor, pole-mounted
Environment Adaptable to high humidity, coastal salt fog, and mild corrosive atmospheres
Vibration / interference No severe vibration, impact, or strong electromagnetic interference at installation site

 Applications

  • Utility distribution networks requiring voltage stabilization on long overhead feeders

  • Industrial facilities with fluctuating load demands

  • Rural and suburban power lines experiencing voltage drop over distance

  • Renewable energy systems requiring consistent voltage under variable generation conditions

Additional voltage ratings and customized configurations are available on request. Contact Rockwill for application-specific sizing and technical support.

Solutions for Voltage Regulator

  • Midnight Voltage Surge to 420V Causes Plant Shutdown? The RVR-1 Automatic Voltage Regulator Breaks the
    Introduction: A "Low-Load Hours" Crisis That Struck in the Early MorningBetween 1:00 AM and 7:30 AM on August 24, while most plants were in their low-production overnight window, one facility was forced to shut down three times in succession due to voltage spikes reaching 420V. This was not a grid fault, but a classic case of "off-peak voltage over-limit."During late-night hours when grid load is light, line losses are minimal, and excess reactive power causes the terminal voltage to rise sharpl
  • Comprehensive Solution for Replacing RS Series Stepping Voltage Regulators
    Ⅰ. Analysis of Original Equipment Specifications and System Requirements AssessmentCore Features (ABB RS Series Stepping Voltage Regulator): Voltage Regulation Range: 100V-440V AC input, output 0.7-1.0 times rated voltage (e.g., 400V input yields 280-400V output). Control Interface: Supports 4-20mA analog signal or RS485 digital communication (Modbus protocol), default parameters: 9600 baud rate, no parity, 8 data bits, 1 stop bit. Load Capability: 5A-16A RMS current, suitable for high-power ste
  • Zanzibar project – voltage regulator selection misalignment with load requirements: root cause analysis & solution
    I. Incident BackgroundThe 33kV line voltage regulator (13 taps, 4% step per tap) supplied by our company for the Zanzibar project has been commissioned and is currently in operation. However, during nighttime periods of low load, the regulator has repeatedly caused the low-voltage side voltage at the downstream factory to rise to 420V, triggering overvoltage shutdowns of production machinery. Following these incidents, the customer specified a maximum permissible low-voltage side tolerance of 41
  • Step Voltage Regulator Solutions for Enhancing Rural Distribution Network Stability and Efficiency
    Ⅰ. Technical Principle and Core Advantages1. Working PrincipleThe 32-step voltage regulator is a tap-switching type voltage regulation device that adjusts voltage by automatically switching the tap positions of series windings:Boost/Buck Mode: A Reversing Switch selects the relative polarity of the series and parallel windings, achieving a ±10% voltage regulation range.32-Step Fine Regulation: Each step adjusts the voltage by 0.625% (32 steps total), preventing abrupt voltage changes and ensurin
  • Innovative Solutions of Step Voltage Regulators in Power Distribution Systems
    1 Executive SummaryVoltage Management Challenges in Modern Distribution Networks: Long-distance feeders causing voltage drop; Distributed energy resource (DER) integration leading to bidirectional power flow; Load fluctuations causing frequent voltage variations.Technical Features of Step Voltage Regulators (SVRs): Employs tap-changing technology to alter transformer winding turns ratio, achieving a ±10% voltage adjustment range (typically in 32 steps, 0.625% per step); Core advantage

Reference Projects for Voltage Regulator

  • Successful Case of 263 Units of 33kV Oil-immersed 32-step Voltage Regulator Controller Project in Bangladesh
    Successful Case of 263 Units of 33kV Oil-immersed 32-step Voltage Regulator Controller Project in Bangladesh01 Overall Project Overview1.1 Project BackgroundIn June 2024, 263 units of 33kV oil-immersed 32-step voltage regulator controller were officially delivered and applied to the Bangladesh Medium Voltage Distribution Network Upgrade Project. R&D and manufactured by Rockwill, these devices are used for voltage stability regulation, load fluctuation adaptation and power supply quality impr

Documentation Resource Library Voltage Regulator

Rockwill Electric Group Profile
Public.
Rockwill Electric Group Profile
Brochure
English
RVR-1 Type  Single Phase Automatic Voltage Regulator  6kV-34.5kV
Restricted.
RVR-1 Type Single Phase Automatic Voltage Regulator 6kV-34.5kV
Operating Instruction
English
PDF
PDF
RVR-1  Single Phase Automatic Voltage Regulator 6kV-34.5kV
Restricted.
RVR-1 Single Phase Automatic Voltage Regulator 6kV-34.5kV
Catalogue
English
PDF
PDF

Certifications Voltage Regulator

FAQ for Voltage Regulator

What remote monitoring and SCADA integration capabilities does this Voltage Regulator offer?

This digital Voltage Regulator offers optional GPRS, GSM, and Bluetooth wireless connectivity, enabling remote operational status supervision, parameter configuration, fault diagnostics, and seamless integration into utility SCADA systems.

How is the single-phase Voltage Regulator deployed on three-phase overhead power lines?

For three-phase distribution networks, three single-phase Voltage Regulator units can be connected in a grounded-neutral star (Wye) configuration to provide balanced ±10% regulation across all three phases, with additional open-delta configurations also supported.

What built-in lockout and protection features are integrated into this Voltage Regulator?

To safeguard downstream distribution assets, this Voltage Regulator incorporates integrated hardware and controller lockout functions against line faults, continuous overload, short-circuit overcurrent, and undervoltage conditions.

What is the voltage adjustment range and step accuracy of this Rockwill Voltage Regulator?

Engineered as a tap-changing autotransformer compliant with IEEE C57.12, this Voltage Regulator delivers a ±10% boost and buck range across 32 discrete steps (approximately 0.625% per step) to reliably compensate for line voltage drops and load fluctuations.

Send inquiry
+86
Click to upload file
Download
Experts Electrical is dedicated to serving the personnel in the global power industry.
Join Experts Electrical, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!
App Store
Download
Get the IEE Business Application
Use the IEE-Business app to find equipment, obtain solutions, connect with experts, and participate in industry collaboration anytime, anywhere—fully supporting the development of your power projects and business.
Message
Inquiry
Email
E-mail
WhatsApp
WhatsApp
Chat
Chen/CEO